The CleverLoop app can support multiple Base Stations through the single app interface, so it's quite common for users to set up multiple Base Stations in a single location using a single Wi-Fi network. Good examples of this are larger houses, office environments and depots/workshops that need 8, 12 or even more cameras.


If you have ordered multiple Base Stations and want to set them up on the same local network, here are a few notes that will help.


A Base Station can't tell if a camera has already been added to another Base Station on the same network. This means that when you go to setup a second Base Station on your network, it may add cameras that you have already connected to your first Base Station.


This problem is really easy to solve. Once you have setup the first base station and its cameras, all you need to do is unplug (i.e. power off) the cameras that you have connected to this system. Then set up your next Base Station and its cameras as per the instructions through the app. If you do this, the second Base Station will only pick up the second set of cameras because the first set of cameras are all turned off. 


You can repeat this process for each additional Base Station you are setting up. Once you have setup all of the Base Stations, you can then power up all of the cameras and they will automatically connect to the correct Base Stations.