If you want to update your router you may need to adjust your network settings to make sure your Base Station is able to switch from your old router to the new one. Here are some instructions on how to do this: 


First you'll need to decide if you want to hook up the new router via a connection to your existing router or if you want simply replace your old router.


Replacing the old router

This will involve copying all the settings from your old router to the new one. Refer to this link for more information:  http://www.howtogeek.com/210597/clone-your-current-router-for-a-headache-free-router-upgrade/ 


After adjusting the settings, you can connect your Base Station to the new router (it can take a few minutes for cameras to re-connect to your Base Station).

 

Connecting your new router to your old router

If you just want to have a separate network for your CleverLoop system you can connect your new router to the old one. Please use a different SSID for each router, otherwise your cameras will be unable to tell which router they need to connect to. 


Please follow the instructions below:

 

1. Keep your old router as it is. Use an Ethernet cable to connect the new router to the old router. 

2. Keep your Base Station and cameras hooked up to the old router and make sure you can access your cameras using the CleverLoop app. 

3. Set an SSID for your new router. It should be different from your old one. 

4. Use the CleverLoop App to change your camera’s WiFi information to the new SSID (new router).
5. Disconnect your Base Station from your old router and connect it to your new one. (Your Base Station and your camera(s) should be connected to the new router).

6. Wait for a few minutes - the cameras should go online automatically.