Dimensions (standing vertically on base)
- 130mm high x 60mm wide x 70mm deep
- 5.1" high x 2.4" wide x 2.8" deep
- 5 Volt Dc 1.5 Amp switch mode plug
- 720P High Definition
Field of View
- 80 degrees
- 1.5m (60") cable attached to wall transformer (male 3.5mm x 1.35mm round plug at other end)
- 1.5m (60") extension cable (male and female 3.5mm x 1.35mm round plugs)
- 2m (79") CAT 6 ethernet cable
- RJ45 network connection
- Female 3.5mm x 1.35 round power connection
- Reset button
- Micro SD card slot (not used)
- Approximately 500mA
Infra Red wavelength
- 2.4GHz (802.11 b/g/n)
- The indoor camera has an articulated connection, comprised of a ball joint that is limited to 90 degrees of movement in the vertical plane, between the camera and the mounting base. This allows the camera to be mounted on practically any surface from horizontal to vertical and aimed in the required direction.
- The app allows the image from a camera to be flipped, mirrored, or flipped and mirrored, which facilitates mounting the camera upside down if required.
Suitable replacements for power supply
- This product or similar would be a suitable replacement for an indoor camera power supply should you misplace it. (note: you would need to find a model with the correct plug configuration for your country).